|
With Teleprime, you get the right signaling
converter solution with options for your signaling network and support for
commissioning from our own technical support center. |
| |
|
ISDN Signaling Converter using QuadroM Gateway!
ISDN Signaling Converter
For your Signaling Converter ...
New SS7 Decoder application for SP201 and SP230
- Only from Teleprime!
Signaling Converter - SS7 Decoder
|
Teleprime's Signaling
Converter Products |
|
SP230,
SP201,
SP201SA, QuadroM Signaling Converter
Products |
|
Teleprime sells
state of the art Signaling Converter products for your CAS, ISDN,
SS7 and other Signaling
Converter needs. |
|
What is a
Signaling
Converter?
A
Signaling Converter enables
network connectivity by performing signaling conversion between various switches and
equipment that use different signaling protocols. To
inter-work standardized signaling protocols like SS7, C7, C5 (N5), DTMF, R1,
R2, ISDN, and other CAS or CCS signaling based protocols, a
Signaling Converter is required.
Applications for switches, VoIP gateways or next generation networks can be enabled by our
signaling converter products. For newer VoIP networks, the
signaling converter offers a low cost
WAN access to SS7 or C7 based networks. Teleprime now offers low cost
IP based provisioning for our Signaling Converter products.
Teleprime introduces the QuadroM series ISDN signaling converter
products.
If you need a
Signaling
Converter , please review
our
Signaling Converter
product line
below:
|
Application |
Signaling Converter Products |
|
ISDN
Signaling Converter for PRI Euro ISDN to PRI NI-2 signaling
conversion |
ISDN Signaling
Converter using QuadroM
|
|
High Capacity
SignalPath 230 (SP230)
High Capacity/Fault Tolerant Signaling Converter (SP230) - CCS -
SS7/C7 or PRI ETSI/ANSI ISDN and CAS (R1,R2,DTMF/MF) based
Scalable capacity - 1 to 52 T1 or E1 CAS or PRI trunks
T1/E1 Signaling Converter resolving signaling
protocols such as SS7, C7, PRI/Euro ISDN, CAS such as R1, R2, DTMF,
C5 and many others with true signaling conversion and processing in
a single scaleable platform . SP230 Signaling Converter is the premier signaling
converter platform for meeting network control signaling incompatibilities
today. It Increases your potential to connect to a larger portion
of the world market and also eliminates charges you may be
currently paying to one or more companies for network connections.
The SP230 Signaling Converter has a modular design, with a capacity of up to 52 E1 or
T1 interfaces for your signaling converter needs. |
SP230 Signaling Converter
 |
|
Signaling Converter
for CCS - SS7
or C7 or PRI ETSI or ANSI ISDN and CAS ( R1 , R2 , DTMF / MF )
Thin Route Now supports multiple telcos
(destination SS7/C7 point codes)
The SP201 Signaling
Converter is an advanced signaling converter designed to
facilitate interoperability between incompatible signaling communication
networks. The SP201 Signaling Converter enables a seamless interface between in-band
and out-of-band signaling networks, and between out-of-band
signaling networks and
other out-of-band networks. It has the capability to support R1,
R2, DTMF, C5, ANSI SS7, ITU-T C7, and Primary Rate ISDN signaling protocols.
SP201 signaling converter has a capacity of either 2 or 4 T1 or E1 links. |
SP201 Signaling Converter
 |
|
Signaling Converter
for PRI ETSI or ANSI ISDN and CAS (R1 , R2 , DTMF / MF) Single or
dual trunk (desk top) Now supports T1/E1 or
u/A law conversion applications
The SP201-SA
Signaling Converter is a smaller, more versatile replacement of the R2Adapter. It
addresses the need for a low-cost signaling converter product that is universally
compatible with most enterprise and customer premise PBXs,
IP-PBXs, IP video conferencing, media gateways, and multi-service
access devices. The compact SP201-SA signaling converter desktop unit, which supports
many R2 country variants, is capable of carrying
traffic over one or two T1 or E1 trunk via standard BNC or RJ48
connections. |
SP201SA Signaling Converter / Adapter
 |
|
