Quadro FXO Analog Gateway
Essentially, the Quadro FXO gateway is a modular approach to adding additional outside PSTN or traditional telephone service lines to a corporate phone network that utilizes an Teleprime Quadro IP PBX. Each Quadro FXO is a stand-alone SIP gateway device consisting of a VPN-router, firewall, HTTP server, and call processing software.
Read More
The FXO includes advanced PBX features and integration with any Quadro IP PBX is pure plug-and-play. If ports are in short supply, you can add multiple gateways to the IP PBX. Devices recognize each other and auto-configure.
The Quadro FXO Gateway can be used stand-alone as well, without an IP PBX (as with IP Centrex for example). The six FXO lines can be assigned VoIP network DID numbers by an ITSP.
PDF Downloads
Quadro FXO tech data sheet
Total simultaneous calls: 6
Ethernet LAN ports: 1
Ethernet WAN ports: 1
Quadro ISDN VOIP Gateway
The Quadro ISDN Gateway performs similarly to the FXO version but connects using ISDN ports. The gateway includes four ISDN BRI connections for phones and analog devices that can connect to the telephone company's central office or to a local PBX.
Read More
The Quadro ISDN can be used to add inbound lines, balance outbound call volumes from a combination of analog devices and IP phones.
Each Quadro ISDN is a stand-alone SIP gateway device that includes a VPN-router, firewall, HTTP server, and call processing software. Installing the Quadro ISDN requires very little configuration. A Quadro IP PBX will automatically present the new ISDN ports within its management system. The lines can be local within the office or used as an "extension cord" to remote branches.
Note: ISDN is not widely supported in the USA. It is intended for all other countries with large networks of ISDN-based service providers. If you are unsure of ISDN support in your region please contact your dealer or Teleprime Technologies directly for clarification.
PDF Downloads
Quadro ISDN Gateway tech data sheet
ISDN SO ports: 4
Ethernet LAN ports: 1
Ethernet WAN ports: 1
Quadro FXS 26 Gateway
The ability to use a large existing analog telephone base with a new IP telephony network is a very important requirement for many Teleprime customers. The Quadro FXS 26 gateway can be added to an IP network allowing the analog phones to join the new VoIP network.
Read More
These gateways can be stacked for additional capacity and is only limited to the capacity of the core IP PBX the gateway connects to. This gateway can be installed with any SIP-compliant IP PBX on the market or plug and play with an Teleprime IP PBX. The modular approach of the Teleprime gateway allows the SMB or enterprise customer to retain an investment from the past while adopting the latest technology with ease.
The QuadroFXS 26 gateway provides a number of powerful features not found on standard FXS gateways. This includes a detailed call routing table with digit manipulation options. Most of the call routing and other features related to call handling found in our IP PBX products is also available on the Teleprime gateways. Once the FXS gateway has registered with the Teleprime IP PBX, the FXS extensions are mapped to IP lines and managed directly from the Teleprime PBX management GUI. An end-to-end Teleprime solution simplifies management and deployment, thus reducing the total cost of ownership of an Teleprime IP PBX network.
PDF Downloads
Quadro FXS 26 Analog Gateway tech data sheet
FXS ports: 26
Ethernet LAN ports: 1
Ethernet WAN ports: 1
QuadroM E1/T1 Gateway
This model features 30 channels of compressed g.729 codec and conforms to a broad variety of voice codecs and signaling protocols. Architecture and design enhancements improve sound quality and application integration.
Read More
The QuadroM E1/T1 is available in a sturdy metal rack-mountable housing that permits the inclusion of a built-in power source and cooling fan for heavy duty operation and extended life span.
The QuadroM version includes call routing and auto attendant capabilities, voice prioritization over data and sophisticated firewall and security elements. The QuadroM functions primarily to bridge traditional PBX traffic to the Internet, reducing costs and simplifying system administration.
PDF Downloads
QuadroM E1/T1 tech data sheet
Ports for analog phones
or devices: 1
Single E1/T1 port: 30 simultaneous calls (E1),
24 (T1)
E1/T1 ports: 1
Ethernet LAN ports: 1
Ethernet WAN ports: 1
QuadroM Dual E1/T1 Gateway
The QuadroM Dual E1/T1 doubles again the call capacity of the QuadroM E1/T1, affording as many as 60 simultaneous calls (48 simultaneous calls for T1--US and Japan) from the two broadband trunks.
Read More
The QuadroM Dual E1/T1 30 features 30 channels of g.729 compression codec, QuadroM Dual E1/T1 60 allows for 60 channels. Sound quality and application integration match the quality of the QuadroM E1/T1 with single port.
The QuadroM Dual E1/T1 is also available in the durable rack-mountable housing including built-in power source and cooling fan for heavy duty operation and extended life.
The QuadroM version includes call routing and auto attendant capabilities, voice prioritization over data and sophisticated firewall and security elements. The QuadroM functions primarily to bridge traditional PBX traffic to the Internet, reducing costs and simplifying system administration.
PDF Downloads
QuadroM Dual E1/T1 tech data sheet
Ports for analog phones
or devices: 1
Dual E1/T1 ports: 60 simultaneous calls (E1),
48 (T1)
E1/T1 ports: 2
Ethernet LAN ports: 1
Ethernet WAN ports: 1